9ft Custom Feather Flag – Small Angled Advertising Flag
- Indoor/Outdoor flags
- Single or double sided
- Dye Sublimated 4 oz polyester mesh flag material
- Fiberglass and aluminum pole set
- Base options for indoor and outdoor
- Optional carry bag
Custom Feather Angled Flag
Get your business noticed with a professionally printed Custom Feather Angled Flag from Overnight Grafix. The tall curved design creates excellent visibility for storefronts, dealerships, trade shows, sporting events, festivals and promotional displays.
Your custom artwork is printed in vibrant full color on lightweight polyester flag material designed to move naturally in the wind. Choose from single-sided or double-sided printing depending on your display requirements.
- Professional full-color custom printing
- Indoor and outdoor use
- Single-sided or double-sided options
- Lightweight polyester mesh flag material
- Durable multi-piece flag pole system
- Multiple base options available
- Optional carrying bag for transportation and storage
Single-Sided Printing
Single-sided flags allow the printed design to show through the fabric. The front displays the strongest color while the reverse side appears mirrored with slightly lighter color.
Double-Sided Printing
Double-sided flags use separate printed graphics on each side with an internal blockout layer. This allows your message or design to display correctly from both viewing directions.
Recommended Applications
Feather flags are an excellent advertising solution for businesses that need portable, highly visible signage.
- Retail storefronts
- Car dealerships
- Open houses
- Trade shows
- Outdoor festivals
- Grand openings
- Restaurants
- Sporting events
- Real estate advertising
Size & Specifications
| Size | Assembled Height | Graphic Size | Flag Weight | Flag + Pole | Pole Pieces |
|---|---|---|---|---|---|
| X-Large | 18 ft | 24" × 183.5" | 1.5 lbs | 2.43 lbs | 5 Pieces |
| Large | 14 ft | 28" × 138" | 1.3 lbs | 1.79 lbs | 4 Pieces |
| Medium | 10.5 ft | 24" × 104" | 1.1 lbs | 1.4 lbs | 4 Pieces |
| Small | 9 ft | 23.5" × 78.5" | 0.8 lbs | 1.14 lbs | 4 Pieces |
Material & Printing
Available Base Options
Ground Stake
Recommended for grass, dirt and other soft outdoor surfaces.
- Material: Aluminum
- Weight: 3.6 lbs
- Use: Outdoor soft ground
- Ball bearing allows flag to swivel in wind
Best For: Outdoor use
Cross Base
Portable base designed for concrete, asphalt and indoor flooring.
- Material: Aluminum
- Weight: 6.73 lbs
- Use: Indoor/Outdoor hard surfac
Best For: Hard surfaces
Water bag
A portable weight bag designed to add stability to flag stands on hard surfaces such as concrete, asphalt, tile, and indoor flooring.
- Material: Plastic
- Weight: 3 lbs empty
- Use with cross base for extra weight
Best For: Hard surfaces
Square Base
Heavy-duty steel-style base for greater stability on hard surfaces.
- Material: Steel
- Weight: 21.83 lbs
- Indoor/Outdoor hard surface
Best For: Indoor / Outdoor
Artwork & File Setup
For the best possible print quality, please prepare your artwork using the specifications below.
- Recommended Formats: PDF, AI, EPS or high-resolution JPG
- Color Mode: CMYK
- Resolution: 150 DPI or higher at final print size
- Convert fonts and text to outlines whenever possible.
- Remove unnecessary crop marks unless specifically requested.
- Use the Overnight Grafix artwork template when available.
Overnight Grafix can help prepare your artwork or create a custom feather flag design using your logo, colors, text and branding.
Installation Guide
Lay Out Pole
Place all pole sections on a clean surface in the correct order.
Connect Pole
Join the pole sections until the complete flexible pole is assembled.
Install Flag
Carefully slide the pole through the sewn sleeve along the edge of the flag.
Secure Flag
Attach and tension the bottom of the flag before inserting the pole into the selected base.
Make sure the lower tension cord is properly tightened. Correct tension helps keep the flag smooth and gives the display its distinctive feather shape.
